Complete Filtration Systems
Individual Filter Holder Set PVF-47/1 NB
Suitable for general filtration in laboratories, microbiological test, suspended solid analysis, etc. Two stainless steel holder types differ only in the funnel capacity (either 300 ml or 500 ml). Filtration set complete:
-
oil free vacuum pump
-
stainless steel vacuum filtration holder
-
suction flask with silicon stopper
-
water trap
-
vacuum hose 1 m
Specifications
|
Vacuum pump with gauge |
- 200 mbar final vacuum - flow rate 20 l/min max. - 230 V, 50 Hz, 160 W - 215x120x235 mm |
|
Filter Holder |
- funnel capacity 300 ml or 500 ml, 100 ml graduations - funnel, base, filter support, clamp and tap – stainless steel AISI304 - suitable for 47 mm membrane filter - stainless steel lid is optional |
|
Suction flask with stopper |
- 2,5 l vacuum resistant glass flask with glass hose nipple - one hole silicon stopper |
|
Water trap |
- ready-to-connect filtration unit, including PP housing Ø 65 mm and hydrophobic PTFE membrane with pore size 0,22 mm |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
Individual Filter Holder Set PVF-47/1 NBPP
Suitable for general filtration in laboratories, suspended solid analysis, particulate contamination test. The funnel is made of polypropylene with a bayonet-type closure. Filtration set complete:
- oil free vacuum pump
- stainless steel vacuum filtration holder with polypropylene funnel
- suction flask with silicon stopper
- water trap
- vacuum hose 1 m
Specifications
|
Vacuum pump with gauge |
- 200 mbar final vacuum - flow rate 20 l/min max. - 230 V, 50 Hz, 160 W - 215x120x235 mm |
|
Filter Holder |
- funnel capacity 250 ml, 50 ml graduations - funnel - polypropylene, base, filter support, tap – stainless steel AISI304 - suitable for 47 mm membrane filter or 55 mm paper filter |
|
Suction flask with stopper |
- 0,5 l vacuum resistant glass flask with glass hose nipple - one hole silicon stopper |
|
Water trap |
- ready-to-connect filtration unit, including PP housing Ø 65 mm and hydrophobic PTFE membrane with pore size 0,22 mm |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
Individual All Glass Filter Holder Set PVF-47/1 NBS
Suitable for general filtration in laboratories, microbiology & suspended solid analysis, solvent purification, HPLC mobile phase filtration. Filter holder is made of 100% borosilicate glass with fritted filter base. Base design has integral vacuum connection located above filtrate drip. Filtration set complete:
- oil free vacuum pump
- glass filtration holder
- suction flask
- water trap
- vacuum hose 1 m
Specifications
|
Vacuum pump with gauge |
- 200 mbar final vacuum - flow rate 20 l/min max. - 230 V, 50 Hz, 160 W - 215x120x235 mm |
|
Filter Holder |
- funnel capacity 300 ml, 50 ml graduations - funnel, base, filter support, tap – borosilicate glass, anodized aluminium clamp - suitable for 47 mm membrane filter |
|
Suction flask |
- 1 l vacuum resistant glass flask with glass hose nipple |
|
Water trap |
- ready-to-connect filtration unit, including PP housing Ø 65 mm and hydrophobic PTFE membrane with pore size 0,22 mm |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
Individual Vacuum Filter Holder Set PVF-110 NB
Suitable for insoluble components removal from samples. The 500 ml sample volume can be poured into filter holder bowl and filtered on 110 mm paper filter. The 72 cm2 filter area allows short filtration time. The outlet connector is an integral part of the base bottom with three unscrewed legs. Filtration set complete:
- oil free vacuum pump
- stainless steel vacuum filtration holder of 500 ml capacity
- suction flask with silicon stopper
- water trap
- vacuum hose 1 m
Specifications
|
Vacuum pump with gauge |
- 200 mbar final vacuum - flow rate 20 l/min max. - 230 V, 50 Hz, 160 W - 215x120x235 mm |
|
Filter Holder |
- 500 ml capacity - bowl, filter base, filter support, legs, bottom connector (hose nipple) – stainless steel AISI304 - suitable for 110 mm paper filter |
|
Suction flask with stopper |
- 2,5 l vacuum resistant glass flask with glass hose nipple - one hole silicon stopper |
|
Water trap |
- ready-to-connect filtration unit, including PP housing Ø 65 mm and hydrophobic PTFE membrane with pore size 0,22 mm |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
Individual Pressure Filter Holder Set PNF-142 B
Suitable for several liters sample filtration. It is a stable construction and is easy to operate. The 3000 ml sample volume can be poured into a large filling port and filtered on the 142 mm membrane filter. The large filtration area of 130 cm2 ensures high flow rate. The filter holder is connected directly to a pressure source. Three swing-out locking clamps ensure leak-proof installation just by hand-tightening.The outlet connector is an integral part of the base bottom with unscrewed legs. Filtration set complete:
- oil free membrane compressor
- stainless steel pressure filtration holder of 3000 ml capacity
- pressure hose set
Specifications
|
Membrane compressor |
- 4 bar pressure max. - 23 l/min max. - 220-240 V, 50 Hz, 150 W - 290х160х250 mm |
|
Filter Holder |
- capacity 3000 ml - barrel, filter base, filter support, legs, clamps, bottom connector (hose nipple) – stainless steel AISI304, EPDM O-ring in the top part - suitable for 142 mm membrane filter |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
2-, 3-, 4-, 5- and 6 place vacuum manifold set with stainless steel funnels and transfer pump
Suitable for general filtration in laboratories, microbiological test, suspended solid analysis, etc. The transfer pump is able to create sufficient vacuum for vacuum filtration simultaneously transferring the filtered aqueous-based fluids directly to waste. The filter holder is directly connected to the transfer pump to reduce place and time for maintenance. No suction flask or waste bottle is needed. The vacuum produced by the transfer pump is controlled by the gauge. The stable benchtop has 2, 3, 4, 5 or 6 vacuum outlets each with leakproof two-way stainless steel valve. Available with either 300 ml or 500 ml stainless steel funnels. Filtration set complete:
- transfer pump
- stainless steel vacuum manifold with stainless steel funnels
- vacuum hose 1 m
Specifications
|
Transfer pump with gauge |
- 200 mbar final vacuum - flow rate (water) 4 l/min min. - 220 V, 50 Hz, 75 W - 220x310x170 mm |
|
Vacuum Filter Manifold |
- funnel capacity 300 ml or 500 ml, 100 ml graduations - funnel, base, filter support, clamp and tap – stainless steel AISI304 - suitable for 47 mm membrane filter - stainless steel lid is optional |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
Dimensions of vacuum filter manifolds with stainless steel funnels
|
Description |
Dimension |
|
2-place SS manifold with SS funnels |
272x122x214 mm |
|
3-place SS manifold with SS funnels |
422x122x217 mm |
|
4-place SS manifold with SS funnels |
572x122x217 mm |
|
5-place SS manifold with SS funnels |
722x122x217 mm |
|
6-place SS manifold with SS funnels |
872x122x214 mm |
2-, 3-, 4-, 5- and 6 place vacuum manifold set with stainless steel funnels
Suitable for general filtration in laboratories, microbiological test, suspended solid analysis, etc. The stable benchtop has 2, 3, 4, 5 or 6 vacuum outlets each with leakproof two-way stainless steel valve. Available with either 300 ml or 500 ml stainless steel funnels. Filtration set complete:
- oil free vacuum pump
- stainless steel vacuum manifold with stainless steel funnels
- suction flask with silicon stopper
- water trap
- vacuum hose 1 m
Specifications
|
Vacuum pump with gauge |
- 200 mbar final vacuum - flow rate 20 l/min max. - 230 V, 50 Hz, 160 W - 215x120x235 mm |
|
Vacuum Filter Manifold |
- funnel capacity 300 ml or 500 ml, 100 ml graduations - funnel, base, filter support, clamp and tap – stainless steel AISI304 - suitable for 47 mm membrane filter - stainless steel lid is optional |
|
Suction flask with stopper |
- 2,5 l vacuum resistant glass flask with glass hose nipple - one hole silicon stopper |
|
Water trap |
- ready-to-connect filtration unit, including PP housing Ø 65 mm and hydrophobic PTFE membrane with pore size 0,22 mm |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
Dimensions of vacuum filter manifolds with stainless steel funnels
|
Description |
Dimension |
|
2-place SS manifold with SS funnels |
272x122x214 mm |
|
3-place SS manifold with SS funnels |
422x122x217 mm |
|
4-place SS manifold with SS funnels |
572x122x217 mm |
|
5-place SS manifold with SS funnels |
722x122x217 mm |
|
6-place SS manifold with SS funnels |
872x122x214 mm |
2-, 3-, 4-, 5- and 6 place vacuum manifold set with polypropylene funnels
Suitable for general filtration in laboratories, suspended solid analysis, particulate contamination test. The stable benchtop has 2, 3, 4, 5 or 6 vacuum outlets each with leakproof two-way stainless steel valve. The 250 ml capacity funnel is made of polypropylene with a bayonet-type closure. Filtration set complete:
- oil free vacuum pump
- stainless steel vacuum manifold with polypropylene funnels
- suction flask with silicon stopper
- water trap
- vacuum hose 1 m
Specifications
|
Vacuum pump with gauge |
- 200 mbar final vacuum - flow rate 20 l/min max. - 230 V, 50 Hz, 160 W - 215x120x235 mm |
|
Vacuum Filter Manifold |
- funnel capacity 250 ml, 50 ml graduations - funnel - polypropylene, base, filter support, tap – stainless steel AISI304 - suitable for 47 mm membrane filter or 55 mm paper filter |
|
Suction flask with stopper |
- 2,5 l vacuum resistant glass flask with glass hose nipple - one hole silicon stopper |
|
Water trap |
- ready-to-connect filtration unit, including PP housing Ø 65 mm and hydrophobic PTFE membrane with pore size 0,22 mm |
|
Vacuum hose |
- thick-walled silicon hose ID 6 mm |
Dimensions of vacuum filter manifolds with stainless steel funnels
|
Description |
Dimension |
|
2-place SS manifold with PP funnels |
171x120x210 mm |
|
3-place SS manifold with PP funnels |
281x120x210 mm |
|
4-place SS manifold with PP funnels |
391x120x210 mm |
|
5-place SS manifold with PP funnels |
501x120x210 mm |
|
6-place SS manifold with PP funnels |
611x120x210 mm |